- Support for up to 16 interpolated axes at the same time
- Correction of the tool diameter (internal and external)
- Down-cut and up-cut milling
- Automatic detection of internal objects and inversion of correction
- Cutting internal objects as the first ones
- Setting the input position of the cutter into the workpiece
- Setting the order of the objects
- Vertical plunge cutting
- Plunge cutting along the ramp
- Entering into a side of the material along the arc
- Cutting in many stages of plunge cut
- Excavating materials for pockets
- Excavating material for pockets with detecting islands
- Engraving on bent surfaces
- Excavating material line-by-line and subsequent drawing aside
- Setting the value of the cutter cover
- Generating paths for cylindrical, conical, spherical, torus cutters
- Simulation of the machining and calculation of working time
- Automatic cutting corners with engraving cutter
- Automatic finding centres of holes with the scanning head
- Automatic cutting corners with engraving cutter
- Automatic finding centres of holes with the scanning head
- Automatic basing in holes and on edges
- Setting the diameter and the centre of the three scanned points
- 3D scanning line-by-line
- Scanning 2D profiles
- Automatic correction of the tool length
- Automatic correction of the cutter deflection
- Servo Drives auto-tuning using genetic algorithms
- Real-time visualization of work progress
- Standard Ethernet Communication
- Support for the fourth axis in the interpolated and indexed mode
- Support for automatic tool changing (ATC) with a storage
- The function of monitoring dispenser, laser, plasma
- Support for G-code files in Fanuc, Siemens, Heidenhain standards
- Handling files such as plt, dxf, bmp, hpgl, dat
- Milling and drilling circuit boards
- Support for the dynamic analysis of vectors
- Processing up to15,000 blocks per second
- Smooth regulation of the feed rate using the potentiometer
- Smooth regulation of the spindle rotational speed using the potentiometer
- Displaying coordinates in real time
- Displaying the distance to the lowest point in the program
- Suspending the program with the ability to continue operating from any block
- The function of the test execution of the program over the material
- Setting the acceleration and the spurt
- Auto processing programs with or without confirmation
- Handling emergency situations with the possibility of continuing treatment
- Preview the loaded 3D toolpath
- Rotating, leaning and the mirror of the toolpath
- Saving the project file along with all the settings of the machine
- Support for a laser scanner
- Support for an oscillating knife
- Support for an oscillating knife with a creasing head
- Manual control with the possibility of moving several axes at a time
- Stepwise manual control of axes speeds: 0.001, 0.01, 0.1, 1, 10mm
- Built-in editor
- Scaling, spreading, copying, mirror, stretching
- Embedding inline and True Type fonts
- Automatic serialization of numbers based on data files
- Projecting the path on uneven surfaces
- Milling flat tpaths on the cylindrical surface in the axis of rotation
- Operating on nodes - adding, deleting, moving
- Automatic smoothing paths
- Automatic reduction and multiplication of nodes
- Edge offset tangents
- Graduation of shoes
- Wacom tablet support
- Path smoothing
- Reduction of nodes
- Helical milling
- Thread milling
- Projecting the path on curved surfaces
- HSM machining
- Controlling Servo Drives in the Direct Position Control
- Support for angularly set active heads
- Drilling deep holes
