Usually mounted horizontally under the machine gate, it can contain up to 12 toolholders. The tool change is faster than in linear magazines due to the shorter travel time to the tool change point.
The linear tool magazine is mounted on the CNC table. It works with spindles equipped with the possibility of an automatic tool change. It contains 12 tool cradles capable of holding up to 12 toolholders.
This function allows for the automatic change of tools during a job. The toolholder is taken by the machine spindle from the tool magazine (linear or rotary). With this function, there is no need to interrupt the job and manually change the tool.
The tool offset sensor allows you to automatically enter the length of the tool in the CNC toolholder or directly in the spindle chuck. The machine automatically measures the tool length, then corrects the Z-axis coordinate so that the tooltip is at the correct compensation height. On machines equipped with automatic tool changer, the measurement can be performed once or before each use. It is also possible to measure the tool after machining to check its parameters and to see if it is damaged or still in a proper working condition.
High-quality cast iron rotary axis for CNC milling machines. It is suitable for processing steel, cast iron, aluminum and other non-ferrous metals, plastics as well as wood and other related materials. The control can take place in the indexed mode or with smooth simultaneous interpolation. The axle is available with a tailstock. Supplied as standard with a 125 mm diameter three-jaw chuck.
Additional fourth controlled axis. The spindle is tilted around the Y-axis in the range from -95 to 95 degrees. It allows the spindle to be tilted, which allows, for example, for machining side walls of profiles or complex door treatment. This axis is controlled in an indexed manner or with smooth simultaneous interpolation.
Additional controlled axis installed directly on the spindle. Designed for controlling angle aggregates. It enables fixing various types of angle aggregates, eg adapted to circular saws with different disc diameters, fixing cylindrical tools via ER baskets. The possibilities of the rotary axis "C" depend mainly on the assumed angle aggregate. The C axis has the possibility of smooth simultaneous interpolation.
Kimla CNC routers utilize linear drives. Linear drives consist of a magnetic path and an electromagnet that generates an eletromagnetic filed. Because of this, the drives do not wear and there is no blacklash. Rulers with an accuracy of 0.00019in were used when positioning the motors on the router. The provides you with a highly accurate and fast CNC router.
The oscillating knife head uses a high oscillating speed and a speicalized knife blade to cut through various matierials up to over 1 inch thick.
The oscillation drive is carried out by the pressurized air supplied to the machine. The speed of oscillation and force is regulated by controlling the air flow and there is no possibility of precise adjustment from the computer. The head is characterized by a very high oscillation speed, thanks to which it is possible to cut materials with very high efficiency and speed. Because of the way they generate vibrations, their strength is less than ...